Talurit® 锻造系统

130T – Swager

SKU： P 0130T 1VS 分类： ,

The Talurit® 130T 1VS swager is a powerful, single-pillar swager designed for efficiency, versatility, and operator convenience. Engineered to optimize the swaging process, this machine is ideal for various swaging tasks, ensuring precision and reliability.

The Talurit® 130T 1VS swager is compatible with a wide range of dies and can efficiently swage turnback ferrules, terminals, end stops, and Flemish eye sleeves. Its powerful yet compact design makes it suitable for various applications, providing flexibility and adaptability. Designed with safety in mind, it is robust and reliable, ensuring consistent performance. The swager’s intuitive design allows for easy operation, minimizing operator movements and reducing die wear.

Key features:

  • Efficiency and accessibility:
    • Quick swaging cycle for enhanced productivity.
    • Foot pedal control allows hands-free operation, facilitating easy rope and sling eye adjustments.
  • Variable speed:
    • Customizable speed settings for different swaging tasks.
    • Speed adjustment up to 10 mm/s, slowing down to 3.2 mm/s at full force of 130 tonnes for efficient operation.
    • Superior swaging cycle with a gradual transition of force vs. speed, resulting in a 30% time saving over conventional swagers.
  • User-friendly display:
    • 4.3” display for easy settings and monitoring.
    • Display secured by powerful magnets for optimal operator placement.
  • Quiet operation:
    • Power pack goes into standby mode when not in motion, reducing noise levels to 50 dB.
    • Lower energy usage and reduced wear.
获取报价

很高兴您对这款机器感兴趣。请填写下表，我们将尽快给您答复。

Talurit® Set against a plain, light-colored backdrop, the 130T Swager, a blue industrial machine designed for mechanical splicing of wire rope, stands on a gray floor. It is equipped with a control panel on its side and features a red foot pedal located at the base of the machine. © Copyright Talurit AB. All rights reserved.
Talurit® A close-up view of two gauge interfaces displaying measurements. The top interface, representing the Talurit Group, features the 130T - Swager with the Talurit® logo, plus and minus buttons, and a small gauge graphic typically used in mechanical splicing of wire rope. The bottom interface showcases a larger semicircular gauge with an on/off button and a customization icon. © Copyright Talurit AB. All rights reserved.
Share on:
FacebookLinkedInWhatsappEmailPrint

其他信息

Max. swaging force

1 300 kN

最大流体压力

310 bar

工作压力

30 – 310 bar

Length of stroke

45 mm

Die holder

Die block size

,

Power

Rated current at 400 V

Rated current at 230 V

Piston velocity (Low)

1,2 – 10,0 mm/s

Piston velocity (High)

1,2 – 3,2 mm/s

最大油量

25 liter

Noise level

70 dB (A)

Working height

1 150 mm

重量

460 kg

查看所有压紧器
完整的产品系列

用于钢丝绳机械拼接的高级液压捻接器

液压压接钳是一种用于全球许多行业（如建筑、海洋和航空航天）的重要机器。它们主要用于钢丝绳的机械拼接，使用高压将卡环、端子和其他配件压接在钢丝绳上。由于压接钳在钢丝绳的安全连接中起着至关重要的作用，因此它在各种应用中都变得至关重要。我们的所有压紧器都是在瑞典的工厂制造的，已成为优质、创新和可靠的代名词。

Talurit® 压套机：提高安全和性能标准

Talurit® 品牌斜切器的设计符合最高的安全和性能标准，是全球专业人士的首选。凭借数十年在钢丝绳拼接解决方案方面的专业知识，我们不断完善液压压接钳的设计和功能，以确保每次使用都能达到最佳效果。

精度和功率：配备先进液压系统的压区机

我们的液压压接机的主要特点之一是其先进的液压系统，可提供精确的控制和巨大的动力，实现钢丝绳的无缝拼接。这使操作人员即使在更苛刻的环境中，也能实现稳定耐用的端接。

安全第一，不影响效率

符合人体工程学的设计确保了操作的简便性，减轻了操作员的疲劳，提高了钢丝绳拼接任务的生产率和效率。此外，内置过载保护和紧急停止装置等安全功能让操作员高枕无忧，确保安全的工作环境。

我们的竞争优势就是您的优势

在Talurit Group ，我们对质量和创新的承诺体现在液压校正机的方方面面，从使用高档材料的耐用结构到制造过程中对细节的一丝不苟。每台液压弯管机在交付给客户之前都要经过严格的测试，使其从一开始就能在具有挑战性的条件下正常工作。

在您的车间里拥有一台Talurit® 品牌的卷绳器是钢丝绳接续技术卓越的象征。凭借无与伦比的可靠性、精确度和安全性能，自 40 年代以来，我们的液压压接钳一直是要求最好的专业人员的首选。

铁环和配件
通过 ISO 9001 认证的产品。
施肥机
坚固、安全、可调节的斜楔。
切割机
钢丝绳切割和退火机。
钢丝绳搬运
卷绕、卷取、开卷和测量。
试验机
试验台、钢丝绳夹具和负载监控。
Gerro™ Combi
我们创新的组合绳系统。