The 250T swager is a machine with a compact design. The swager has a single pillar open throat for easy access to the swaging area. It is fitted with a powerful two-stage hydraulic and oil cooler and equipped with standard functions such as stroke limier and hold position.
The 250T swager is built for long durability and is the result of continuously developing our swagers since the start in 1948. While technology has developed, so have our swagers with increased ease of operation and even better ability to service it. Our machine design together with the use of only leading brand components gives these machines the best service life in the market, and a lower total cost of ownership.
The swaging operation is controlled by an electric foot pedal permitting the operator to use both hands to handle the rope assembly when swaging. In addition to the standard up/down function, the foot pedal has a ”hold” position toggle to facilitate rope/eye adjustment and to make tool set-up quicker.
With the pressure gauge, it is possible to preset the required pressure and get the die set to open automatically once this pre-set pressure is reached. Saving production cycle time and reducing operator movements and wear of the dies.
The retraction length of the bottom die can be adjusted by the timer function. The hydraulic unit shuts down after an adjustable idle time and can be started again by just pressing the foot control. This energy saving feature is also in addition reducing the already low noise level.
OPTIONAL EQUIPMENT
Die holders
- FIX C1 250T Standard die holder with pillar guide. Dies are locked with bolts.
- FIX 2,5”x5” Optional die holder with pillar guide. Dies are locked with bolts.
Insert die holders
With optional insert die holders smaller dies can be used:
- VIN B1/C1 for dies size B1
- VIN 2”x3,5”/2,5”x5 for dies size 2”x3,5”
Noise level (SILENCER 250T)
Optional SILENCER 250T with extra insulation can reduce the noise level to less than 68 dB(A).
TALURIT – Safety / Efficiency / Reliability / Quality
Talurit uses the latest techniques in engineering to ensure our manufacturing processes are to the highest quality standard, as well as highest possible safety level. Our key components are fully traceable with batch number, material certificates and quality inspections.
During development we take great pride in risk assessing our products to create a safe environment for the user, of course fulfilling the EU Machine directive and requirements for ISO 9001. On demand we can adapt this to any local standard.
All our swagers are developed and manufactured in-house in our workshop in Gothenburg, Sweden. And are delivered with a full technical documentation along with instructions.
