The P 0250 1S swager has a single pillar open throat design. It offers total flexibility. This swager is easy to use and the open design allows easy access to the dies. The swager is fitted with a hydraulic unit.
The swager body is manufactured from one single block construction that ensures strength, long service life and aminimum of maintenance. All swagers are thoroughly test run.
The 250T swager has a capacity to swage T, TS and UM ferrules up to approximate no. 22 in single stage. Multi stage swaging makes it possible to swage T and UM ferrules up to No. 30.
The swaging operation is controlled by an electric foot pedal permitting the operator to use both hands to handle the rope assembly when swaging. In addition to the standard up/down function, the foot pedal has a ”hold” position toggle to facilitate rope/eye adjustment and to make tool set-up quicker.
By setting the required pressure on the pressure gauge MA 250T-1S, the piston returns automatically once the pressure is reached. This saves time and unnecessary movements for the operator. When left un-used the resource saving automatic shut down will turn off the machine, but is easy to start again by pressing down the foot pedal.
An oil cooler is built into the swager to cool down the hydraulic oil.
Dies and insert die holders
Die size C, C1 are standard. With the die holder FIX 2,5”x5” dies size 2,5”x5” can be used. Dies C1 is for swaging with several stage. With optional insert die holders smaller dies can be used:
• VIN B1/C1 for dies size B1
• VIN 2”x3,5”/2,5”x5 for dies size 2”x3,5”
• FIX C1 250T Standard die holder with pillar guide. Dies are locked with bolts.
• FIX 2,5”x5” Optional die holder with pillar guide. Dies are locked with bolts.
Noise level (SILENCER 250T)
Optional SILENCER 250T with extra insulation can reduce the noise level to less than 68 dB(A).