The TALURIT 600T swager is a great choice for achieving efficiency in your workshop for medium sized wire ropes. As our most popular swager it has proven reliable and efficient during the course of many years!
Key benefits:
The TALURIT 600T swager is a great choice for achieving efficiency in your workshop for medium sized wire ropes. As our most popular swager it has proven reliable and efficient during the course of many years!
Key benefits:
600T Swager | |
---|---|
Tonnage | 600 tonnes |
Working range T-ferrules STS Terminals Flemish Eye | Single/multi stage T 34 / T 42 STS 30 / STS 42 3/4" / 1 1/4" 1 1/2" |
Die set block size | D (110 x 156 mm) C1 and C with insert die holders (see options) |
Standard functions | Silencer Stroke limiter Hold position Electrical pressure gauge |
Power | 11 kW |
Size | 1 975 x 720 x 1 845 mm |
Weight | 2 315 kg |
Noise level | Less than 70 dB (A) |
The TALURIT® 600T 2 pillar swager has 36% less environmental impact from production than machines with the same capacity from other actors in the industry.
The TALURIT 600T 2S hydraulic swager is a great medium sized swager consisting of a single body casting. The machine generates a low sound during the swaging process, which contributes to an operator friendly working station. The smart foot pedal control allows the operator to use both hands when concentrating on the swaging procedure. In addition to the standard up/down function, the foot control can activate a hold-function, which keeps the die sets in place, giving the operator time to facilitate rope or sling eye adjustment as well as making the making tool set-up quicker.
With the pressure gauge, it is possible to preset the required pressure and get the die set to open automatically once this pre-set pressure is reached on the 600T 2S hydraulic swager. Saving production cycle time and reducing operator movements and wear of the dies.
The retraction length of the bottom die can be adjusted by the timer function. The hydraulic unit shuts down after an adjustable idle time and can be started again by just pressing the foot control. This energy saving feature is also in addition reducing the already low noise level.
OPTIONAL EQUIPMENT
Die holders
Insert die holders
Smaller dies can be used with insert die holders:
OPERATION
Touch screen extended (T-PANEL EXT)
This user-friendly touch screen is a good way for operating the Swager and collecting production data to optimize production and setup time. Integrated service reminders and protective alarms increases the lifetime and helps you keep track of the swager’s condition. The extended T-panel is containing a recipe handling system to store different swaging programs, such as Flemish eye, End stop or STT-terminals. These programs will reduce human error and are according to the TALURIT splicing instructions. There is also a possibility to make different swaging cycles that can contain multiple stages of your own liking. The swager will perform each step by using the foot pedal stepwise until performing each of the steps the swaging cycle consists of. The T-panel EXT handles both metric and imperial measurements.
Adjustable height (HEIGHT ADJUSTER)
Standard working height is 1270 mm. With this option the working
height can be adjusted from 1335 to 1530 mm
Oil cooler (OIL COOLER 600T)
If the swager is running continuously in very warm climates, we
offer an optional external oil cooler.
TALURIT – Safety / Efficiency / Reliability / Quality
Talurit uses the latest techniques in engineering to ensure our manufacturing processes are to the highest quality standard, as well as highest possible safety level. Our key components are fully traceable with batch number, material certificates and quality inspections.
During development we take great pride in risk assessing our products to create a safe environment for the user, of course fulfilling the EU Machine directive and requirements for ISO 9001. On demand we can adapt this to any local standard.
All our swagers are developed and manufactured in-house in our workshop in Gothenburg, Sweden, and are delivered with a full technical documentation along with instructions
600T Swager | |
---|---|
Tonnage | 600 tonnes |
Working range T-ferrules STS Terminals Flemish Eye | Single/multi stage T 34 / T 42 STS 30 / STS 42 3/4" / 1 1/4" 1 1/2" |
Die set block size | D (110 x 156 mm) C1 and C with insert die holders (see options) |
Standard functions | Silencer Stroke limiter Hold position Electrical pressure gauge |
Power | 11 kW |
Size | 1 975 x 720 x 1 845 mm |
Weight | 2 315 kg |
Noise level | Less than 70 dB (A) |
The TALURIT® 600T 2 pillar swager has 36% less environmental impact from production than machines with the same capacity from other actors in the industry.
The TALURIT 600T 2S hydraulic swager is a great medium sized swager consisting of a single body casting. The machine generates a low sound during the swaging process, which contributes to an operator friendly working station. The smart foot pedal control allows the operator to use both hands when concentrating on the swaging procedure. In addition to the standard up/down function, the foot control can activate a hold-function, which keeps the die sets in place, giving the operator time to facilitate rope or sling eye adjustment as well as making the making tool set-up quicker.
With the pressure gauge, it is possible to preset the required pressure and get the die set to open automatically once this pre-set pressure is reached on the 600T 2S hydraulic swager. Saving production cycle time and reducing operator movements and wear of the dies.
The retraction length of the bottom die can be adjusted by the timer function. The hydraulic unit shuts down after an adjustable idle time and can be started again by just pressing the foot control. This energy saving feature is also in addition reducing the already low noise level.
OPTIONAL EQUIPMENT
Die holders
Insert die holders
Smaller dies can be used with insert die holders:
OPERATION
Touch screen extended (T-PANEL EXT)
This user-friendly touch screen is a good way for operating the Swager and collecting production data to optimize production and setup time. Integrated service reminders and protective alarms increases the lifetime and helps you keep track of the swager’s condition. The extended T-panel is containing a recipe handling system to store different swaging programs, such as Flemish eye, End stop or STT-terminals. These programs will reduce human error and are according to the TALURIT splicing instructions. There is also a possibility to make different swaging cycles that can contain multiple stages of your own liking. The swager will perform each step by using the foot pedal stepwise until performing each of the steps the swaging cycle consists of. The T-panel EXT handles both metric and imperial measurements.
Adjustable height (HEIGHT ADJUSTER)
Standard working height is 1270 mm. With this option the working
height can be adjusted from 1335 to 1530 mm
Oil cooler (OIL COOLER 600T)
If the swager is running continuously in very warm climates, we
offer an optional external oil cooler.
TALURIT – Safety / Efficiency / Reliability / Quality
Talurit uses the latest techniques in engineering to ensure our manufacturing processes are to the highest quality standard, as well as highest possible safety level. Our key components are fully traceable with batch number, material certificates and quality inspections.
During development we take great pride in risk assessing our products to create a safe environment for the user, of course fulfilling the EU Machine directive and requirements for ISO 9001. On demand we can adapt this to any local standard.
All our swagers are developed and manufactured in-house in our workshop in Gothenburg, Sweden, and are delivered with a full technical documentation along with instructions