ESP

These end stops are made from mild carbon steel, designed for full proof applications of rotation resistant wire rope of grade 1960. Fill factor needs to be between 0,61 and 0,76. Wire rope must conform to EN 12385.

The end stops are equipped with a pad eye and are easy to mount in a crane.

With the inspection hole, the operator can verify that the dead end of the wire rope has reached the bottom of the end stop before swaging. Chip for RFID (radio frequency identification) can be glued into designated area after swaging and covers the inspection hole.

Art. No: ESP 23 D52 – ESP 32 D64
To find the right ferrule size, check the data sheet.

Product Description

GENERAL DESCRIPTION
These end stops are made from mild carbon steel. They are designed for full proof applications of rotation resistant wire rope of grade 1960. Wire rope must conform to EN 12385. Equipped with a pad eye they are easy to mount in a crane. The pad eye can not be used for other lifting purposes. The chamfered surface around the cylinder matches different fitting devices. To distribute the stress over a larger area the bore of the end stop is slightly conical.
 
 
APPLICATIONS
Our ESP system is designed to fit a number of general end stop applications. One of these being the crane wire rope field. Note! Before ordering it is important to make sure that the housing where the end stop will be fixed is matching the ESP series diameters and lenghts after pressing. The end stop is specifically designed for rotation resistant round strand ropes with a fill factor, f, between 0,61 and 0,76. Terminations should not be exposed to temperatures outside the range -40°C to 150°C. End stops are marked with article number or as per customer’s request.
 
 
TO BE NOTED
With the inspection hole the operator can verify that the dead end of the wire rope has reached the bottom of the end stop before swaging. Chip for RFID (radio frequency identification) can be glued into designated area after swaging and covers the inspection hole. Chip is not included.

Data Sheet