||A mechanical assistant

A mechanical assistant

A mechanical assistant for forming of turnback terminations

Acting as a mechanical assistant, the RBS 100 is the best way to deal with the heavy, labour intensive, time consuming and, sometimes dangerous work of forming a sling eye using large diameter wire rope. Mounted onto our 2000T swager, it is very effective and cost efficient, allowing a single operator to easily and safely handle the whole operation. This tool also simplifies the whole process by putting emphasis on sling eye shape and accuracy. Our 2000T swager is equipped with a powerful two-stage hydraulic unit and has a safe design according to proven standards. The operation of the machine is extremely easy since an electrical foot pedal permits the operator to use both hands when swaging.

Place the ferrule between the press dies and apply just enough pressure to hold it in place. Using the hydraulic controls the wire rope is drawn between the gripping plates of the pulling part, through the ferrule and then into the gripping plate of the rotating part. This section of the unit forms the sling eye and directs the wire rope end back through the ferrule. The pulling part then easily tightens and finally shapes the eye to the correct size. The wire rope is now set for swaging.
When not in use the RBS 100 can be neatly folded to the side to save space.

The RBS 100 is designed for our 2000 ton range of swagers, and is suitable for wire ropes of up to 100 mm diameter.

E-mail us at sales@talurit.se or call us at +46 31 709 80.

By | 2017-06-13T15:06:08+00:00 April 7th, 2017|Products|0 Comments